跳转到主内容

发售于2016年9月16日。型号为1660、1778。有 GSM 或者 CDMA 网络制式可选。提供32、128或者256GB 的存储空间。提供玫瑰金色、金色、银色、黑色和亮黑色。

1286 个问题 查看全部

iPhone 7 screen replacement: home button not working. Try new screen?

I just replaced my iPhone 7 screen that was cracked. The replacement screen works but the home button doesn’t. No clicking and no Touch ID. When I put home button back on original screen that’s cracked Touch ID works, but no clicking. On both I tried loosening and tightening the screws to no avail. Is it safe to say I likely damaged the home button? Or based on what I wrote would it be worth it to buy an additional replacement to try it again?

回答此问题 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

2个回答

最有帮助的答案

You’ll need a magnifier to check if you damaged the replacement screen home button flex cable but it may be defective too..in any case a replacement screen should fix the issue.

这个答案有帮助吗?

按维修分数 1

评论:

Okay. I have order a higher end replacement screen since it’s worth it for me to find out at this point. I’ll post an update when I try that. Thanks for your advice

添加一条评论

If you have tested the home button on your original cracked screen and the touch ID functions but does not “click” then the home button is damaged and replacing the screen probably wont fix it. The home button has a U10 IC on the home button flex that if replaced should fix this issue as long as there is no other damage to the home button. You will need to have the home button sent to a repair centre that can perform micro soldering and can replace that IC for you.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

midwest12 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 49