声誉积分: 1
2
1
1
Hello iFixit forum users i have a question at the moment i have 6s plus, which one displays blank screen (no image), but u can connect to iTunes, it recognises i have tryed to swap, change LCD screen’s but problem stay the same no image. MY QUESTION WILL BE ON LOGIC BOARD WHICH ONE SMD DIODE, CAPACISTOR, IS RESPONSIBLE FOR LCD IMAGE? if any knows just write me down how they are named in Iphone 6s plus schematics. Thank u!
声誉积分: 2.4千
4
1
1
iPhone 6s and 6splus series have same issues that i solved on that cases that is the Chestnut related issues.First clear about that there is no light present but logo shows or not that is not the software issues anymore.Some capacitor near LCD connector causes that problem.
这个答案有帮助吗？
maybe it's FL4291? i have tested that it shows me 0.650. i have tryed to test lcd connector on logic board its starts from left side when u looking straitght to connector just is that 0.650 is not too high? should be around 0.550 ? as i know ? ? what do you think ?
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 145
May I know how does it get recognized. Does it get recognized as "iPhone in Recovery Mode". If not, it may be your LCD screen. Before replacing, inspect the pins of the LCD and see if it doesn't have any bent pins. If there are no bent pins, inspect your motherboard. It may have bent pins or foreign objects that may prevent it from working properly.
由 fbmt11 完成的
fully working iphone without any signs of image just blank screen i have tryed to change LCD same issue
由 Darius Varanavičius 完成的
pins are clean
由 Darius Varanavičius 完成的