跳转到主内容

Repair guides for the Kenmore 80 Series of washing machines, manufactured by Kenmore.

121 个问题 查看全部

Gets stuck filling and spinning

Kenmore 600 washer when you set timer to 9 or below it works fine but when you set to above 9 it will fill rinse and then gets stuck where its draining and filling at the same time

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

If the washer is filling and draining water at the same time check the following:

  • Make sure that the house drain is at least 30 inches high. If so, check to make sure the drain hose is not pushed too far down into the drain. If it is, pull it out 2" inches. That should solve the problem.
  • If house drain is not at least 30" high, an anti-siphon clip was included in the installation package. It attaches to the hose and the back of the washer to lift the drain hose up. For more information, see Washer Drain Height.
  • View a short video on washer filling and draining:
  • https://products.geappliances.com/applia...

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

Daniel Vermillion 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 77