跳转到主内容

发布于2016年3月,是一款同时拥有着iphone 6s般的硬件规格以及4英寸屏幕体积的iPhone。有深空灰色、银色、金色及玫瑰金色四种配色以及16/64GB容量可选。国行型号为A1723和A1724。

1046 个问题 查看全部

Bottom pentalobe screw spinning in hole

Hi guys,

I replaced the screen on an iPhone SE I acquired cheap but am experiencing some strange behaviour with ghost touches and missed inputs. To fix this I will try cleaning the contacts and or trying another display but on trying to open the device one pentalobe screw comes out fine but the other just spins in the hole at the bottom of the device. There is another question on here describing similar behaviour on an iPhone 4 but my experience differs as I am using the official screwdriver from my ifixit kit and the handle of my screw driver has not come loose with the shaft and screw remaining stationary as was suggested on that post and the screw head is in perfect condition with no stripping as was also mentioned in the other post. The screw spins perfectly just with no backing off.

I’m baffled guys i have tried the rubber band method even though the screw is not stripped and different screw drivers any help would be greatly appreciated.

Thanks,

Callum

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

最有帮助的答案

Screws just spinning generally mean the metal posts have broken off the screen. Or back cover for your iPhone 4. Sometimes lifting up the bottom of the screen a tiny bit with prying allows you to remove the screw that just spins.

这个答案有帮助吗?

得分 1

1条评论:

If lifting up on the screen does not make the screw come out then I would see if you can just pop the screen out from the bottom. We run into this some times when we are doing repairs. It's also sometimes possible to get the screw to attach to the screwdriver it is's magnetized and pull it out.

完成的

添加一条评论

添加你的答案

Callum Cooper 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 245