跳转到主内容

Repair and disassembly guides and support for dish washing appliances.

700 个问题 查看全部

Removing Bosch SHP65T55UC/02 control module

I’m trying to remove the control module for a Bosch SHP65T55UC/02 dishwasher and I cannot figure out how to remove it. I have the door separated and after slightly bending the 5 top clips back it still won’t budge. Any help would be appreciated!

Block Image

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

已选择的解决方案

the side with the five clips is not the side the control panel is released from…the control panel together with the facia plate is released from the door by undoing the 3 torx 20 screws in the handle (top of recess). once the control panel and facia plate are removed from the door assembly the release tabs highlighted in the attached photo can be accessed...these clips are facing the exterior front panel…lift the clips while gently pushing the panel down (towards the bottom of the machine) and the control panel will fall away from the facia plate.

Block Image

这个答案有帮助吗?

得分 3

1条评论:

I have this machine. Does anyone know where the thermal fuse is located ?

完成的

添加一条评论

Hi @jasons1969 ,

Don’t know if this is a help or not but here’s a link to the parts for your dishwasher.

Scroll down the parts diagrams on the left of the page to find the “base assembly” diagram, click to enter and then hover your mouse over the parts diagram to find part #0510 which is the control board.

Hopefully you may be able to work out how it is held in from the diagram.

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Jason Van Halen 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 3

过去 30 天: 13

总计 1,118