跳转到主内容

2016年9月16日发售。型号有A1661,A1784和A1785,支持GSM 和 CDMA 格式,存储容量有32GB、128GB以及256GB,颜色有玫瑰金、金色、银色、黑色、新的亮黑和红色。

1364 个问题 查看全部

iPhone 7 plus, dropped, boots to black screen.

Hi, I dropped my iPhone 7 plus down some metal stairs a few weeks after getting it. The screen was smashed and it would turn on, display the apple logo, then boot to a black screen and turn off. I have bought an official apple replacement screen and replaced it correctly. The phone now does exactly the same thing just with a working screen. it turns on, goes to the apple logo, then a black screen, then turns off. I’m really not sure where to go next as I can’t find anyone who has this exact issue, also most suggested fixes for “iPhone 7 black screen” are software reinstalls which I really don’t see working in this case as the issue arose after a drop.

Any help appreciated, Thanks!!!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

You most likely have a logic board issue at this point.

The hard drop probably damaged some components or solder joints on the logic board and it could be just about anything. The only way to have this properly diagnosed is to have an experienced micro-solderer do a full diagnostic on the phone. Sometimes the damage is visible (in the microscope) other times the board has to be probed with a multimeter until the issue is found.

This isn’t really a DIY troubleshooting unless you are skilled with a multimeter and can read schematics (the iPhone has over 50 pages of schematics :>).

这个答案有帮助吗?

得分 1

1条评论:

Thanks so much for your quick reply, do you have an idea how much a repair like this would cost?

完成的

添加一条评论

添加你的答案

d-r-i-v-e-n 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 2,007