跳转到主内容

修复你的物品

维修的权力

配件 & 工具

Repair and support for the controllers that shipped with the PS3. Released mid 2008, the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

141 个问题 查看全部

Why do I need to press the d-pad very hard to work?

Hi! My ps3 controller started having a problem with the d-pad. It doesn't work unless I press it very hard. Do you know what could be the problem and if it is possible to fix? It's not a major problem, but it's still annoying.

Also, my other dualshock 3 has a problem with random inputs but I've already tried to fix it by cleaning it and adding thickness to the contact's foam but that didn't fix it.

In case, do you know where I could buy a new controller in the Netherlands?

Thanks in advance for any reply!

已回答! View the answer 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

任天堂 Switch 套装

快速恢复到游戏的状态

购买 Switch 套装

任天堂 Switch 套装

快速恢复到游戏的状态

购买 Switch 套装

1个回答

已选择的解决方案

Graphite on the back of the D-Pad could be worn down. All you need to do is open up the controller, apply some graphite (pencil or otherwise), and test.

Don’t know about the other controller’s problem, but I’ll look into it.

and for the last question, you can use eBay or Amazon.

这个答案有帮助吗?

得分 1

评论:

Thanks for the reply! Graphite fixed the problem!

On the other controller, instead, I noticed that the circuit board has some lines completely faded where the circuits should touch the mother board, so I guess that's the problem. I saw that it's possible to buy circuit boards for ps3 controller so I was thinking to give it a shot. What do you think? Also, I don't know how I'll be able to attach the circuit board to the plastic that holds it.

完成的

Well, give it a try, if you want to! Check carefully around the board for any clips and/or screws. If the clips are holding in the board, try gently moving them back with a screwdriver.

Good luck!

完成的

I got the new circuit board and it works! So one controller is completely fixed now! Thanks a lot :)

However, the d-pad of the other one is starting to not work again. Also, even with graphite, the d-pad was way much better, but still not completely perfect. To fix it I just rubbed a pencil on the contact surface of the d-pad conductive rubber. Should I do it differently? Do you know a way to fix it 100% and for good? Or should I buy a new d-pad conductive rubber?

Thanks again for the replies and sorry for the new questions!

完成的

Thanks again! Already ordered one a couple of days ago :) that should fix the problem since I tried swapping the conductive rubbers of the two controllers, and the problem moved from one controller to the other.

Thanks again for all the help! really appreciated!

完成的

显示更多的1条评论

添加一条评论

添加你的答案

Filippo Denegri 将永远感激不已
浏览统计数据:

过去的24小时: 7

过去的7天: 33

过去的30天: 130

总计 765