My 3 mos old Whirlpool dishwasher pumps water in and out, no washing
I have a 3 months old Whirlpool WDF520PADM dishwasher and while under warranty, I`d like to try and reset, before making a bunch of appointments. I have had good luck in the past with resetting appliances , but I can`t find anywhere , how to reset this one. I can not push the heated dry and high temp, since I choose them in the mode cycle. It will pump the water in the dishwasher and pump it back out, but will not wash :-(
3条评论
ohhhh...you have no idea how happy you just made me. I tried all kinds of combinations yesterday. I had googled and found somebody else posting how to reset but didn`t work. The problem I found was, that I have the select mode buttons , so I have to go through a sequence before I actually get to the heated dry and normal wash . Well, I just did what you told me and shut the door, turned on 1 hour wash and voila..you just made my day . THANK YOU . So nice to hear my dishwasher working :-)
由 Regina Roberts 完成的
@reginatx Glad I could help you get it fixed ;-)
由 mayer 完成的
@reginatx We have the same dishwasher and issue only it happened 3 years in… did you cycle through the modes to get to normal each time? I can’t seem to get it right
由 Veronika Steen 完成的