跳转到主内容

Support and repair information for Marantz home theater AV receivers and older audio-only receivers.

46 个问题 查看全部

Marantz SR-60 Receiver amplifier

Hi There,

I got a Marantz SR-60 tuner and amplifier that started to blow the 1.25 amp fuse on the power switch and supply board.

Is there a way of getting a board like this, the spec number on the board is:P904 yk058j1 52-2.

When you turn on the unit, it goes on pre-on then, if you turn the unit on and off a few times it just blows the fuse. Not sure it would be the mauve, the board or the fuse.

Would anyone have an idea of what's causing the problem.

Eddie

Thanks

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
添加一条评论

1个答案

已选择的解决方案

It sounds like bad caps or a bad powersupply. Here is the service manul. Take a look and check it out. If you can not get a whole new logic board, all the components are listed, so you should have no trouble fixing it. Good Luck

这个答案有帮助吗?

得分 4

2条评论:

I have SR60 , with one channel intermittent disorted sound, what the cause ? can I have the service manual. thanks

完成的

you can contact me by email, my address is in my user profile. I may still have it....;-)

完成的

添加一条评论

添加你的答案

Eddie 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 2,460