跳转到主内容

The larger of Apple's MacBook Air laptops featuring dual microphones and 802.11ac Wi-Fi connectivity.

465 个问题 查看全部

Display on MacBook is Dim

Spilled a few drops of water on MacBook Air.

Screen is dim but working (I have to shine a flashlight on it to see it). Works fine on external monitor.

Took it apart and found nothing. All cables, etc. are seated fine, good continuity on ‘P’ fuse for backlight and no corrosion anywhere. Apple on back of MacBook no longer lights up.

Would seem odd to be the logic board since the drops of water were on the power button side of the keyboard. Any ideas? I’ve done all the PRAM resets, etc. listed in the solutions here but nothing is working so it must be a problem I can’t see.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

The display cable and the backlight logic are right under the power button! Remember when you are looking from the bottom (left) you are in truth looking on the tops right side.

You’ll need to check the backlight MOSFET and its support logic. Do you know how to use a DVM?

Block Image

Block Image

I suspect you have either a bad solder joint or the chip is blown Q7706 (FDC638APZ)

这个答案有帮助吗?

得分 1

4条评论:

I do know how to use a DVM. I've got the case open and I see the parts you're referring to. I just check ohms across the three? If the chip is blown is it possible to replace? I'm not really into microsolder.

完成的

You want to check the voltage of PPVIN_SOSW_LCDBKLT_FET and ground.

Best to find someone with the needed skills & tools. The part is available On Semi FDC638APZ

完成的

So if we're checking voltage I'm assuming we'll have to open it up and then turn it on and check it. I agree, we're beyond my skill level. Thanks for the help.

完成的

Sorry guy we all can't be doctors ;-}

Don't forget to accept the answer and score it.

完成的

添加一条评论

添加你的答案

Mike Halker 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 155