跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2682 个问题 查看全部

iPhone 6s screen replacement not closing properly near the top

I recently replaced the digitizer assembly as per the guide here on ifixit, and ordered the replacement part from ifixit as well, and in the process discovered that the chassis is actually bent near the top. So after replacement the digitizer and it working (yay!), I realized once I tried closing it up that the screen doesn’t sit flush near the top of the phone (where the camera is), and I think this may be because the phone is bent? I don’t want to push too hard on the screen to force it into position… Has anyone had this happen? I’m not quite sure what to do as I don’t want to leave the phone open like this. Unfortunately I only had the one set of adhesive.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

If the iPhone is bent and screen is not fitting flush in a relatively short time you’ll end up having issues with the digitizer. Logic board also suffers in a bent housing and may develop problems to the bigger chips inside too. Best thing you could do is to remove the logic board if you think you can straighten the housing, otherwise find a used one, relatively easy to find, and move your logic board in that one. Do not try to fit the screen in the bent housing by any means.

这个答案有帮助吗?

得分 3
添加一条评论

添加你的答案

Tristan Smythe 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 188