I diagnosed that my 1R5 inductor is not detchted but loose. It seems I have to push back toward the wall to make the speaker work. But if I let go the speaker stops working. This was caused by a drop. I have a Jbl flip 3.
How do I keep the 1r5 to stay pressed down so my speaker works.
声誉积分: 681
8
2
hey austin,
as a general recomendation i would suggest to look if you can see if the connector to the main board is still correctly soldered in place and to see if you can solder it back on or replace the 1r5 if that doesn’t fix it just stay safe and good luck
-M
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 1
过去 30 天： 3
总计 485
