Why is my power board burning?

Question

Vizio E420-A0

Vizio 42" LED TV released in September 2012.

45 个问题查看全部

Carey @tardisgrooves

声誉积分: 25

2

发帖于: 2018年11月26日

更多选项

Why is my power board burning?

I’ve had my Vizio model M471i-a2 for about 4 years, and about a week ago it started emitting a strong burning smell, and then the top of the screen started having Black flickerings. Took off the back and saw a substantial burn mark on the power board.

Ordered a new board and put the new one in Saturday. Now (Monday night) the same thing is happening all over again to the brand new board!

Here’s a picture of the other side

Thank you turkey! Here’s a pic of the whole side of that board in case that’s helpful:

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 2

5条评论

Did you try connecting power through a different outlet?

由 TechTalks 完成的 2018年11月26日

Yes I did try another outlet

由 Carey 完成的 2018年11月27日

I have the same problem, did anyone find a solution for this?

由 Dude Linger 完成的 2019年7月4日

Hey dude, it did end up being my LED backlights. I wish I would have known that before purchasing new boards, as it will just burn through any new board you install.

由 Carey 完成的 2019年7月5日

I have this same issue on the same model tv. Same burn marks on same board. Do I need to replace the backlights and the board or just the backlights?

由 James Griffin 完成的 2021年4月7日

添加一条评论

3个答案

I have the same problem, did anyone find a solution for this? — Dude Linger
Hey dude, it did end up being my LED backlights. I wish I would have known that before purchasing new boards, as it will just burn through any new board you install. — Carey
I have this same issue on the same model tv. Same burn marks on same board. Do I need to replace the backlights and the board or just the backlights? — James Griffin

oldturkey03 @oldturkey03 声誉积分: 781.6千 1.1千 893 2.3千 · Answer 1 · 2018-11-26T20:40:46-07:00

最有帮助的答案

oldturkey03 @oldturkey03

声誉积分: 781.6千

1.1千

893

2.3千

发帖于: 2018年11月26日

更多选项

@tardisgrooves

that is the cold side of the board and we really would need the underside of it as well. We would need to figure out what circuit those jumpers belong to. From their location I would think that this might be an issue related to the LED backlights. You can always try another board but do not connect the backlight connector and see if it does the same thing. without a schematic it could be difficult to check it any other way.

这个答案有帮助吗？

是否

得分 3

3条评论:

New pic below

由 Carey 完成的 2018年11月27日

@tardisgrooves those look like MOSFETS Most likely for the LED boost circuit. I will try and see if I can find a schematic to verify this.

由 oldturkey03 完成的 2018年11月27日

Thank you turkey! Bigger pic below

由 Carey 完成的 2018年11月28日

添加一条评论