声誉积分: 13
2
Truck has new fuel pump which ran excellent until I blew a fuse on the tail lights. Replaced fuse then theft system came on, cleared codes on theft system. I can pour gas down fuel injection and truck will run on that gas. til it runs our. Just sits and cranks after that.
声誉积分: 13
2
Thanks but my son stopped by and found the problem. Wire to fuel had a bad spot inside the tank.
这个答案有帮助吗？
声誉积分: 109
2
hello magcitrate_41, I’m John it sounds like the vehicle went into anti-thief mode. one thing you could try is to disconnect the battery terminals both of them. Take the terminals and tap them together to completely drain and conductive energy from all the control modules. The ideal here is to reset the system completely. After reconnecting the battery put the key in the Ignition and turn to the on position. Let sit for a minute and start the vehicle.
Also you can try this link that will help you reset the PCM.
这个答案有帮助吗？
by any chance can you inform me what it was or what he did?
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 130
1条评论
@john2367 what was the issue that your son found on this?
由 oldturkey03 完成的