跳转到主内容

2016年9月16日发售。型号有A1661,A1784和A1785,支持GSM 和 CDMA 格式,存储容量有32GB、128GB以及256GB,颜色有玫瑰金、金色、银色、黑色、新的亮黑和红色。

1364 个问题 查看全部

Replaced lightening connector and now 4G and phone service unavailable

Hi everyone,

I recently replaced my lightening connector in my iPhone 7 plus along with the loud speaker, the new parts work fine as it charges and the speaker is much louder however I can no longer get a signal or 4G at all.

There is a lot of mixed information online but does anyone know which parts may have been damaged and what I should be looking to replace?

Additionally I have tried all the troubleshooting for no service issues such as resetting the phone etc, none of which have worked.

Any answers appreciated, thanks.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

You’ll want to closely inspect the two wires that come from the Lightning Port and connect to the logic board; see Step 35 of this guide.

The actual 4G antennas are embedded inside the lower housing. The mish-mash of screws holding holding the Lightning Port also serve to connect the various embedded antennas to the flex. So start by checking the condition of the wires leading from the flex. Check the connector ends and check the connectors on the logic board. If they are damaged or improperly connected, you will not get signal. Also check to make sure you didn’t mix them up; one is longer than the other and has to connect further up the logic board.

If in doubt, re-install the original flex to see if the signal comes back, that would indicate a faulty Lightning Port, even if it charges and communicates okay.

这个答案有帮助吗?

得分 3
添加一条评论

添加你的答案

aidanstewart 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 71