跳转到主内容

发售于2016年9月16日。型号为1660、1778。有 GSM 或者 CDMA 网络制式可选。提供32、128或者256GB 的存储空间。提供玫瑰金色、金色、银色、黑色和亮黑色。

2261 个问题 查看全部

flashing apple logo after new screen installation

after switching out the new screen, the screen would only display a flashing apple logo. tried restoring and updating and it wouldn’t work.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

1个答案

已选择的解决方案

There are a few of possibilities here:

  1. It could be a bad replacement screen. Try installing the original screen to see if the problem goes away. If it does, then you probably have a bad replacement screen.
  2. It could be damage to the Home Button or Front Camera Flex. Take a close look at the flexes and connectors, preferably with magnification. If in doubt, just connect the screen alone without the FCAM or HB. The bootup will take longer but once booted, everything else should work.
  3. You have logic board damage. This could be caused by accidental damage during the repair or latent issues that only crop up after repairs and the requisite shutdown and reboot, such as the Audio IC or Baseband. If you have a short bootloop (~10 secs) it’s usually the Baseband IC.

这个答案有帮助吗?

得分 5
添加一条评论

添加你的答案

sam sherman 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 101