跳转到主内容

2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1397 个问题 查看全部

When I apply pressure to the top right of the logic board it turns on

I’ll explain the history of this device. The customer dropped it off at our shop to check and see if the phone can be fixed. He has dropped the phone and the screen cracked including the inside display meaning that the drop was fairly hard.

The housing doesn’t have dents (other than the usual drop scratch marks), no signs of liquid damage, no long screw damage present checked under microscope. The phone will boot up to the lock screen if you apply pressure to this area of the logic board constantly marked in red:

Block Image

If you relieve pressure while the screen is on the phone will basically fade away into a black screen but the board is still receiving power.

I’m thinking there are bad solder joints under the CPU, what are the chances a reflow will fix this?

On a side note how do I unplug a iPad Mini digitizer cable without damaging the connector on the board? I have ripped the connector pins on it before.

EDIT: Solved. See answer below.

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

Macbook 电池维修套装

起价 $69.99

Buy Now

Macbook 电池维修套装

起价 $69.99

Buy Now

1个答案

已选择的解决方案

Never mind a reflow behind the logic board at the affected area fixed it.

这个答案有帮助吗?

按维修分数 1
添加一条评论

添加你的答案

Ben 将永远感激不已
浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 3

总计 26