跳转到主内容

2015年3月更新的 13 英寸 MacBook Pro 配备 Retina 显示屏,型号为A1502,采用第五代英特尔酷睿 i5 和 i7 处理器,并配备 Force Touch触控板。

1185 个问题 查看全部

Can I replace this connector? Keyboard connector? Backlight?

My wife spilled a small drink on my MacBook Pro A1502 2015 the other day. It was on at the time, powered down correctly. Left upside down overnight. Used it briefly the next day. Today wouldn't boot fully; crashes as soon as cursor appears on black boot screen. Just took it apart and cleaned it with alcohol as per guide. It looks to me like this connector got hot and was melted slightly. I'm assuming it's the keyboard connector but I'm an idiot. I haven't reassembled or attempted a boot yet.

What is that connector?

Can I replace it? Who could?

Other ideas/advice?

I have some experience soldering SMD but no air gun yet.

Thanks much,

Mr. Mac-less in Medford

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

That’s the keyboard backlight connector and if you’ve come that far with troubleshooting you shouldn’t have any major problem in replacing the backlight sheet, no soldering needed. I can’t see the replacement part on the ifixit store but you could find it elsewhere, there’s more than one spare parts vendor from Uk en eBay too. Only concern is that it looks quite burnt and you might also find some damage on the corresponding side of the logic board. Unless you want and have the ability to get into schematics, you’ll have to try one and see if it works.

这个答案有帮助吗?

得分 2

4条评论:

Thank you! Yes, the board connector looks like a problem. If I was schematically inclined where would be a good place to look for that and the board side connector.

完成的

@limeandcoconut I doubt you'll find a backlight connector anywhere besides a dead board for spares. I already answered about backlight sheet.

完成的

Thanks again!

完成的

@limeandcoconut You're welcome Jacob, hope everything will work out smoothly.

完成的

添加一条评论

添加你的答案

Jacob Smith 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 222