Samsung TV. No picture after updating firmware
I recently replace the backlights on my Samsung UN46EH5000FXZA TV. The television was working after I replace the LED backlights, but some of the guides I looked at recommended updating the firmware on the TV to help prevent the backlights from burning out again. Ever since I updated the firmware I have not had any picture on the TV. The backlight still comes on, I can hear sound, control the tv with the remote (change volume, change source, change channel)
I downloaded the firmware from here: https://www.samsung.com/us/support/owner...
Is there anyway to reset the tv to the old firmware?
12条评论
Why is my Samsung tv picture won't show eup but the menu will work
由 Chuck Bennett 完成的
On Step 4 “Your television will boot up in service mode. Using your remote, go to Options > Factory Reset.” what do I press on the remote to move the cursor and select? I haven’t been able to find any buttons that respond on the factory blue menu screen.
由 Ben Mangan 完成的
Screen is black TV will not turn on red blinking light what could it be
由 Shepri 完成的
need repair person so i can watch tv. have cancer. bed ridden been fighting this for 14 years. gimme time to get to door
由 chrisfleming995 完成的
Samsung tv not coming on just the light is blinking but still blank
由 Akino Richards 完成的
显示更多的7条评论