跳转到主内容

The Vectrex is a vector based video game console that was developed by Western Technologies/Smith Engineering in 1982.

9 个问题 查看全部

it works but I only have a half screen

my vectrex works..but have only half the screen lit up

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

5个答案

已选择的解决方案

My best guess on this (and it is just a guess) is that one of your backlight tubes has gone out. All the half-screen issues I have seen have this same problem.

这个答案有帮助吗?

得分 2

10条评论:

where are the backlight tubes on the CRT? Just checked the manual again and cant find anything like it. Is there another name for it, sorry for asking but have not had a CRT for a while.

完成的

Heey, I said it was a guess. I can guess wrong

完成的

I can't find squat on a half screen issue on a CRT.

完成的

3/4 of the people heree probably don't even know what a BBS is

完成的

I haven't used a BBS in years. +

完成的

显示更多的5条评论

添加一条评论
最有帮助的答案

What an awesome piece of equipment. To bad that there is not a whole lot of info out there about your particular problem. I think it is time for some research before you get it all resolved. Here are a couple of sites one here and another one here I also got the SERVICE MANUAL and do feel free to download it. There is some more info on Wikipedia and just by remembering what I read in the forums and looking at the service manual my first guess would be the digital to analog IC. Of course take a good look at the capacitors and all. But be careful, there is a lot of oomph in that little gadget.Good Luck and let us know how it is going.

这个答案有帮助吗?

得分 3

1条评论:

Paul, sorry about using your question for our trips down memory lane...:-) Do not give up on that piece of hardware... It is awesome and deserves to be fixed.

完成的

添加一条评论

It's the controller that's connected to the back of the crt. It needs to be replaced or fixed if you have enough skill. Call around to some tv repair places that have been around for a long time, hopefully someone there can fix the controller.

这个答案有帮助吗?

得分 0
添加一条评论

There is no back-light bulbs or lamp in a crt!! Sounds like a shorted yoke to me. Take it to an old school TV repair shop, they can test the yoke and possibley replace it.

这个答案有帮助吗?

得分 0
添加一条评论

It's a vector screen, look for a fix in the repair guide. I'll bet is a chip that controls the lower 2 quadrants that can be swapped out.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Paul 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 8

总计 2,920