苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3694 个问题 查看全部

My iPhone stop working after disassembled and assembled it

I disassembled my iPhone and I changed the battery then assembled it back and i turned the iPhone On but it show only Apple logo.. i checked all the connection to make sure that i connect everything properly but it still showing Apple logo. I took it to repairing shop and they tried to repair it but they couldn't..they told me that the motherboard is damage... please i want to know the cause of it. So I will not make the mistake next time

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

1个答案

已选择的解决方案

I don't think anybody can tell you for sure what you might have damaged except the repairing shop where they had the chance to see it..there are very good technicians answering this forum but nobody gifted with ESP AFAIK ;) My first guess, being an iPhone 5s, is that by lifting the battery connector you might have lifted a tiny component sitting next to it. With a good light source and magnification you can examine the close proximity, you'll see some small capacitors and maybe two shiny solder pads where one capacitor was soldered before being lifted.

这个答案有帮助吗?

按维修分数 1
添加一条评论

添加你的答案

Onyeka Aduaka 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 19