跳转到主内容

这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

Sometimes Can't make/receive calls yet has reception

Hi,

I have a customer's iPhone 6 here. Recently replaced the screen and housing for her.

Afterward, there is an issue that every so often it cannot make or receive calls (displays call failed message)

There is reception (2-3 bars), text messages don't seem to be affected nither does 3G as social media notifications still show up. Customer brought it back and I tested it with her sim card and with one of my testing sim cards and it seem to work (I could make and receive calls) serval times through out the day. However once she come to pick it up it did not work again.

Normally I would think this is an antenna issue however in this case its still display enough bars and all other functions work.

Any suggestions to test or parts to replace? (I have the phone with me currently)

Thanks in advance!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

After you have eliminated antennae or network locks as the possible culprit, searching issues on the iPhone 6 are usually related to the baseband IC. The baseband IC is very sensitive, just like the Touch IC's on the 6 Plus; it also suffers from poor quality traces and pads.

Now this isn't a searching issue per se but the Baseband IC is so problematic in this device that it's worth considering.

Go to your phone’s dialing keypad and dial *#06#. You should see the IMEI displayed.

If the IMEI is not displayed, the Baseband IC has to be reballed and two small copper traces (U1/V1) have to be rebuilt and solidified. This is commonly referred to as the “long jumper” solution. You can check out this answer (Service is "Searching" indefinitely) (by @teetopp) as it summarizes the issue really well and he covers other non searching problems as well.

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Micah Morgan 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 176