跳转到主内容

Wi-Fi版的iPad Mini 2指南。2013年10月22号发布同年11月12号上市。iPad Mini 2就是配备了Retina显示屏的iPad Mini,在更小尺寸的的7.9寸屏幕上拥有和iPad Air相同的像素。

220 个问题 查看全部

My iPad Mini seems to be ghosting

I recently got my iPad Mini lcd replaced last December 2017. It was working fine after that but I recently noticed that the bottom right of the screen (right side from the home button) seems to be popping out. When I push it back, the screen would start opening apps or typing by itself. Then I found out that it was ghosting, then I also found out that the right side part from the home button is where the digitizer cable could be found connecting to the logic board. The good thing is that the ghosting would stop when the lower right part of the screen would pop out again and all would be normal. Now my question is, could this just be a loose cable? Does it really require another repair. I dont think in my own side that the digitizer on my ipad is faulty since it works fine when the lower right side would pop out a little bit.

I really am worried on my iPad. A reply would be very grateful for me.

Thanks in advance.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

It's possible that the flex cable was kinked when the digitizer was replaced and it started acting up lately; it's hard to say remotely. What's probably not a coincidence is that the bottom right hand corner is where the flex and Touch Control Board , as well as the connectors et.c are all located.

In my opinion, you will need to open it up and check to see how everything falls into place by comparing it to this guide. Your digitizer may be fine but you have to insure it is installed properly before you can rule that out.

这个答案有帮助吗?

得分 2

1条评论:

Thanks for the answer!

完成的

添加一条评论

添加你的答案

Gene 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,327