Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

1465 个问题 查看全部

No nfc after housing change

I recently refurbished an iPhone 6s using an after market housing. The customer who purchased the phone reported nfc was not functioning. Nfc antennas were changed without success. As a final attempt to fix, the logic board was put into an original Apple housing and nfc was restored. Does anyone know if this is an issue with after market housings?

已回答! View the answer 我也有这个问题


按维修分数 0



Housings vary in quality, you may very well have received one with an issue. See this answer by Tom Chai (Wi-Fi signal weak after replacing housing) to a similar question.

The NFC is also sensitive to how the NFC bracket is placed in relation to the camera. You don't give the impression of being a noob so I am assuming you've done a few of these before :>). That said, all of the antenna magic is based on the proper sequence of installation (Step 39) of all kinds of little conductive thingamabobs with the proper screws.

It's possible you made a misstep on the replacement housing.


按维修分数 2


Thanks for the answer. I can only put it down to the quality of the housing. I am very particular in transferring every single component, even down to the stickers. I tried a different nfc bracket, which was unsuccessful, thus reverting to an original housing.



Steve 将永远感激不已

过去的24小时: 1

过去的7天: 3

过去的30天: 13

总计 48