iPhone fell down —-> Touch stoppen working

If you are confident that your replacement screen is fully functional and there is no damage to the Digitizer FPC connectors on the logic board, then your phone probably suffers from Touch Disease. This is not a DIY repair. Look for a repair shop that can do micro-soldering repairs to properly diagnose your problem.

这个答案有帮助吗？

是否

得分 1

3条评论:

Thanks for your informative answer, appreciate it.

Do you think this can be fixes bu just heating up the touch IC with some flux and 350-370 degrees celsius for some seconds?

由 Nenadbrateu 完成的 2018年5月9日

Check out the link I provided...it is usually caused by a broken trace so reflowing the IC will generally not work or at least, work for long.

由 Minho 完成的 2018年5月9日

Minho, i got 1 more question. If i reflow it will it work for at least 2-5 days?

And do you think that someone could do this on his own

I didnt ever have smd soldering or sth like that

But i had normal resistor capacitors soldered

由 Nenadbrateu 完成的 2018年5月9日

添加一条评论

Thanks for your informative answer, appreciate it.

Do you think this can be fixes bu just heating up the touch IC with some flux and 350-370 degrees celsius for some seconds? — Nenadbrateu
Check out the link I provided...it is usually caused by a broken trace so reflowing the IC will generally not work or at least, work for long. — Minho
Minho, i got 1 more question. If i reflow it will it work for at least 2-5 days?

And do you think that someone could do this on his own

I didnt ever have smd soldering or sth like that

But i had normal resistor capacitors soldered — Nenadbrateu

iPhone 6 Plus

iPhone fell down —-> Touch stoppen working

1个答案

添加你的答案