wireless clock/weather station settings - Taylor model 1463
Cannot find owners guide/manual for this 'older' model wireless weather-station.
It gets AM radio signals from Egypt, or Mars, or somewhere.
I need to set it to ARIZONA time zone.
Taylor web site is useless.
Works perfectly. But, I need to change the time-zone.
Pressing #1 displays 'WORLD' next to the time. ???
( When asked about my world, I was stupified ! )
It has 7 buttons:
1 set/zone
2 alarm
3 clear
4 +/bell
5 -
6 mode
7 ch
Using the highly scientific methodology of Poke & Hope , I have learned:
Press and hold #1 - then the hour blinks.
Release #1 and using #4 plus, and #5 minus, will adjust the hour.
Tap #1 - minute blinks. Adjust plus & minus as above.
Tap #1 - year blinks. Same for month & day.
Press #6 mode - switches the indoor and/or outdoor temperature sensors.
Press #7 ch - nothing happens ???
Press #2 alarm - first alarm clock appears.
Press #2 again - second alarm clock appears
Press #3 clear - erases the alarm clock
Any ideas how to change the time zone ?
Anybody ???
2条评论
BTW: why is this double-spaced ?
由 Tom Shafer 完成的
I got it ! Remove the batteries. Wait till tomorrow. It must have one of the storage-capacitor-thing that holds a little voltage for a short time, while you change the batteries. Remember the no-battery "shake&shine" flashlight ? Same thing.
Tomorrow; insert batteries, set the mo/da/yr and hang on wall. E.T. calls home, and home sets everything right.
由 Tom Shafer 完成的