声誉积分: 13
1
The LCD was replaced. Now the phone is actually charging but no showing the charge. Everything is working. It shows 1% but it actually is charged. Now, it does power on and off on its own? Left it unplugged for two days. It was charged when I came back to check on the process but still showing 1%. Any thoughts?
声誉积分: 307
4
1
was the battery disconnected during the repair and reconnected properly post repair?
这个答案有帮助吗？
声誉积分: 1
1
Same here.. seems to be related to iPhone 8 & IOS 11.3..,
Michelle what iOS are you using? 11.3 perhaps?
这个答案有帮助吗？
声誉积分: 301
6
4
1
If your battery is connected correctly as it should be then its related to IOS 11.3 software issues
这个答案有帮助吗？
声誉积分: 313
2
Would not be the first problem iphone 8 has with replacement screens on ios 11.3, so could be the ios problem
这个答案有帮助吗？
声誉积分: 781
5
3
1
Hello, i have this problem too... i change lcd for some OEM lcd and not work touch, now i make update 11.3.1 and touch work... but battery is still 0% and not showing the charging bold... when i connect to charger come first few seconds +/- 1100mA, after strarting OS come down on 200-380mA.... i inspect the board and like 2mm from battery connector missing one small part looks like capacitor etc.... i think this is the ptoblem.... can you tell me some good man what is the part? :)
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 2
总计 218
