跳转到主内容

修复你的物品

维修的权力

配件 & 工具

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2326 个问题 查看全部

iPhone 6s Black Screen After Screen Replacement

I recently got an iPhone 6s with a pretty badly damaged screen. The screen worked, however it was completely cracked and there was a black bleed mark on the LCD. I ordered a screen and began replacing it.

After replacing the screen and hooking everything back up to the logic board I got a black screen. I absolutely made sure to disconnect the battery before ever touching any other part of the phone. I have also tried connecting it to iTunes and got as far as it asking for the passcode which I cannot enter as the screen does not work.

Now here's where it gets hairy and I'm stuck, after looking through the various other similar questions I attempted to test if thew screen was bad by replacing the severely cracked screen, which I knew worked. After taking all the assembly parts off the new screen and putting them back on and trying to plug it in, I got nothing.

It's still being recognized by iTunes, but now no matter which screen I have plugged in I get a black screen. I have a sinking feeling it's going to require board level repair (which I can't do, yet) but I'm hoping maybe someone here can see something I can't.

If there's something you think may help me get this problem remedied or you need more information on what all I did to it, just ask and I'll happily provide more info. Thanks everyone.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

任天堂 Switch 套装

快速恢复到游戏的状态

购买 Switch 套装

任天堂 Switch 套装

快速恢复到游戏的状态

购买 Switch 套装

2个回答

if you did not disconnect the battery you may have damaged the back light circuit -this will require microsoldering repair to replace the filter-

这个答案有帮助吗?

得分 0

评论:

I did disconnect the battery. Do you think maybe it could be anything else?

完成的

Only other thing I can think of is long screw damage under the two screw holes under screen connectors, but I don't think that would cause that specific issue like that.

完成的

Ok. I guess I'll have to send it in to someone that does board level repair to find out. Thanks.

完成的

let me know how it goes.

完成的

添加一条评论

Backlight filter Gone, this happens once in a blue due to static or mis connection (both 6s 6sp remains with power in the last 3 pins of the connector 3.8v, if battery stay connected and even its off) . use an anti-static wrist band wen doing 6s 6sp.

这个答案有帮助吗?

得分 0

评论:

It's definitely possible. I always make sure to use both a anti-static mat and wrist band when doing repairs. Thanks for the input. I'll get it checked out. Any microsoldering company recommendations?

完成的

Microsoldering.com, iPad rehab

完成的

添加一条评论

添加你的答案

Repair-IT 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 10

总计 1,279