Whats the perfect heat for solder fcp touch connector

Question

iPad Mini 2 Wi-Fi

Wi-Fi版的iPad Mini 2指南。2013年10月22号发布同年11月12号上市。iPad Mini 2就是配备了Retina显示屏的iPad Mini，在更小尺寸的的7.9寸屏幕上拥有和iPad Air相同的像素。

220 个问题查看全部

Ronaldo @getfix

声誉积分: 611

Getfix NL

4

发帖于: 2018年3月15日

更多选项

Whats the perfect heat for solder fcp touch connector

Hi been soldering for a time now. And i can solder a fcp connector on the mainboard of a ipad mini. Only thing its not always going smoothly. Im self tought.

Sometimes the connector comes when connecting to touchscreen etc.

So im wondering what is the perfect temperature for the heatgun to solder. Or any other great tips would be welcome.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

arbaman @arbaman

声誉积分: 102.6千

10

54

291

发帖于: 2018年3月15日

更多选项

I'd say the perfect temperature is the one allowing you to get the job done perfectly without damaging the surrounding components and the Pcb :)

I'm afraid there's no such figure in Celsius degrees on a digital hot air station screen that's good for everyone..there are tenths of possible variables..room temperature, air flow speed, hot air station precision and tolerance, size of the nozzle you prefer to use, melting point of the solder you use..only to list a few..

Just my two cents.

这个答案有帮助吗？

是否

得分 2

3条评论:

Yeah that was my guess to. IT Will get easier in Some time

由 Ronaldo 完成的 2018年3月15日

I agree with Arbaman. However one thing you can do is ensure you are using a soldering iron where the heating element is part of the soldering tip. Cheaper stations that have a separate tip that slips on and screws in over the element. This type of iron will loose heat quickly when contacting a ground plane on the board and it will not recover temperature quickly.

A station such as the Hakko FX951 has the station hardware constantly monitoring the temperature of the tip, which IS the heating element. When the station reads high heat transfer it immediately responds by increasing the power output the keep the tip temperature consistent. You will find that in using a well regulated station, you do not need to keep the temperature set so high all the time.

由 adam 完成的 2018年3月15日

It certainly gets better with time and experience. Fcps don't suffer heat shocks that much but surrounding components might do..unless you work in an environment with constantly controlled temperature and humidity it's good practice not to be in a hurry and preheat the Pcb long enough to get any humidity out of it.

Hearing a phone Cpu popping like corn ain't very nice ;)

由 arbaman 完成的 2018年3月15日

添加一条评论

I agree with Arbaman. However one thing you can do is ensure you are using a soldering iron where the heating element is part of the soldering tip. Cheaper stations that have a separate tip that slips on and screws in over the element. This type of iron will loose heat quickly when contacting a ground plane on the board and it will not recover temperature quickly.

A station such as the Hakko FX951 has the station hardware constantly monitoring the temperature of the tip, which IS the heating element. When the station reads high heat transfer it immediately responds by increasing the power output the keep the tip temperature consistent. You will find that in using a well regulated station, you do not need to keep the temperature set so high all the time. — adam
It certainly gets better with time and experience. Fcps don't suffer heat shocks that much but surrounding components might do..unless you work in an environment with constantly controlled temperature and humidity it's good practice not to be in a hurry and preheat the Pcb long enough to get any humidity out of it.

Hearing a phone Cpu popping like corn ain't very nice ;) — arbaman

iPad Mini 2 Wi-Fi

Whats the perfect heat for solder fcp touch connector

1个答案

添加你的答案