声誉积分: 10.3千
15
29
6
I had the speaker output from my stereo going into the line input jack on my MacBook and I accidentally turned up the volume way too loud and the computer just shut off.
When I went back in, I checked the input section in settings and nothing was there, nor were there any outputs and when I played a youtube video, no sound came out.
So does anyone know what I blew up, where it is and how I can check it?
TIA
声誉积分: 102.6千
10
54
291
I would first try resetting Pram and Smc, in case it is just a glitch. If those don't give you your sound back, it's basically useless to open the Mac searching for blown components.
Audio input is filtered by resistors and capacitors, but if you have no output sound either it means the filter system got crushed and possibly a surge went all the way up to the audio codec.
There are tenths of components involved there and nothing replaceable without testing and soldering.
这个答案有帮助吗？
OK. Ill try that then. I m almost positive its a surge and not a glitch because the volume was turned up WAY to high and it just shut off. Im pretty sure I blew something up. Im thankful though its just part of the audio because this is a laptop I use in school and its not very often I use sound
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 152
2条评论
Does the audio port have a red light in it?
由 mayer 完成的
@mayer it does not
由 Cameron 完成的