跳转到主内容

这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

Multiple Battery/LCD combinations won't work.

Hi all!

Long story:

My parents sent me an iPhone 6 my mother used to use. The screen was cracked, the LCD was having issues, and the battery was acting up. When I first plugged the phone in to charge I was left on the battery symbol against the black background with a sliver of red for 15+ minutes indicating it was charging, but I don't feel as though it really was. When unplugged, the screen displayed a charging cord underneath this battery, obviously indicating it needed to be plugged in. I figured a new batter would fix this issue but to no avail, now that the battery and screen are both replaced, I am no longer getting anything on the screen. Multiple battery / LCD combinations have given me the same standstill of the phone not turning on or showing any signs of life. Plugging in the charger in any of the scenarios yielded no results either. What could be the issue and how can I fix it?

Long story short:

1. iPhone 6 had Screen issues and Battery issues.

2. When plugged in for any length of time, battery did not seem to be charging enough to turn on before repair.

3. After repair, no response on screen at all, even when plugged in.

4. No screen / battery combinations have seemed to be working.

5. What do?

P.S. Yes, I know to unplug the battery before unplugging the screen for repair, and the parts were ordered from my store's (iPhone repair store) distributor as premium parts.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

It sounds like it could be a Tri-Star issue, the charging diode on the motherboard isn't allowing it to take charge basically, generally this allows it to charge when its turned off but when it turns on you cannot charge it anymore. It also takes an extremely long time. Unfortunately the only way to fix it is to replace the actual chip on the motherboard, i have done a few of them with success but they aren't very easy.

这个答案有帮助吗?

得分 0

2条评论:

Where would I find this piece for order and instructions on the repair? I'm relatively experienced with small tech repairs so I may be able to do it if I can find a good instruction source.

完成的

http://www.microsoldering.com/software/

The parts are extremely small, i use a very good scope to make it easier, i don't think you'd be able to do it with just the naked eye. My supplier gets me the parts i need, i am not sure where you'd be able to get them, eBay maybe?

完成的

添加一条评论

添加你的答案

Xander 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 24