修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

Black and white barcode type bars across top of screen.

Just replaced the lightning port on an iPhone 6. Everything went normally until I powered the phone back on and the screen was all messed up. I opened the phone back up unattached and reattached all of the cables that go from the screen to the phone, turned the phone back on and have this weird strip across the top that almost looks like a barcode.

I've unattached and reattached several times and it is still there. Has anyone else had this problem? Is it fixable or am I going to need to buy a new screen?

Block Image

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

In case anyone else has this problem, the solution ended up being just putting the phone back together, powering it on and leaving it over night (phone on but screen was asleep) and the bars faded and eventually went away completely. Not sure what causes this exactly but thankful for an easy fix!

这个答案有帮助吗？

是 否
得分 3

2条评论:

This solution worked for me. I turned on the phone and monitored the screen during the evening. The bars slowly faded away over time. NICE SOLUTION AND THANK YOU FOR SHARING! Joe

由完成的

For me too!!!!! Thank you!!

由完成的

添加一条评论

更多选项

Probably going to need to replace the screen, looks like the ribbon cable has gone bad for the screen.

If this is an iPhone 6 plus on the other hand be careful about touch ic as it shows grey bar on the top and intermittent dead touch issue.

这个答案有帮助吗？

是 否
得分 1

1条评论:

That is what some other people on other forums suggested as well. However, someone suggested just putting it all together and powering it on and leaving it over night. I did that and the lines were gone in the morning. No clue how that works but just happy it did!

由完成的

添加一条评论

添加你的答案

Caroline Haney 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 7

过去 30 天： 10

总计 3,186