已解决： Installed new power port and Tablet won't turn on, why? - Samsung Galaxy Tab Pro 12.2

Installed new power port and Tablet won't turn on, why?

We changed the power charging port following your directions. Great install instructions and no problems. Tablet displayed large green android icon and message "downloading, don't turn off target device." In upper left, displayed message regarding "odin mode." After looking for the answer to that situation, we allowed the battery to completely discharge, then recharged to 100%. Tried holding the power and volume simultaneously. No luck. Still won't reboot and only image now is the full battery. Do you have any suggestions?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

发帖于: 2018年1月30日

更多选项

why did you let the battery discharge when it was only in odin mode, you only had to hold the power button down to turn it off and turn it back on, it would only download if you were trying to reinstall the firmware. try disconnecting the battery and reconnecting it

this guide will show you how to disconnect and reconnect

Samsung Galaxy Tab Pro 12.2 Battery Replacement

这个答案有帮助吗？

是否

得分 1

1条评论:

We replaced a bad power port. "Odin problem" began after we installed the port. The" hold power button" and other button combinations didn't work. We tried letting the battery discharge instead of removing/disconnecting it. How do you disconnect the battery?

由 Roni 完成的 2018年1月30日

添加一条评论

Samsung Galaxy Tab Pro 12.2

Installed new power port and Tablet won't turn on, why?

1个答案

Update (01/31/2018)

添加你的答案