修复你的物品 社区 商店

A media center Workstation laptop, released in 2009. It is the third revision of the 17-inch models in Dell’s Studio line and features a processor architecture based on the Intel Montevina platform.

6 个问题 查看全部

更多选项

New screen: Power button cable turns latop off.

So I bought a replacement screen for my 1737. After replacing it I went to test, it lit up and started booting! SUCCESS!!!!

But then it turned off immediately.... after trying the usual suspects, just as I was giving up hope, I had a thought.

While it was powered, I reseated the cable to the power button. It started booting..... and turned off again.... strange.

I reseated it again, and unplugged it right after the latop started booting.... SUCCESS, for reals this time!!!!

So, Any advice or common issues with the power button cable or perhaps the button itself sending constant 'presses'???

I would like to be able to turn the laptop on without removing the keyboard and fiddling with the cable, haha.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Hi

Just wondering if you accidentally "pinched" the power button board cable near the hinge area when you reinstalled the display.

Here is a link to the service manual for your laptop.

Here is an image taken from the service manual to show where I mean.

Block Image

(click on image to enlarge for better viewing)

这个答案有帮助吗？

是 否
得分 1

1条评论:

I was wondering if this could be the issue. I will check and relieve any pressure on it.

由完成的

添加一条评论

添加你的答案

Andross Nelson 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 186