跳转到主内容

Clothes dryer repair and support guides.

869 个问题 查看全部

Gas Dryer will not stay hot

I have a Kenmore gas dryer - model 110.78. It is not staying hot. I see the flame through the hole in the front and it ignites and it starts to get hot but when I check in like 20 minutes, its cold again.

I'm trying to determine if its the solenoids or the thermal fuse.

But if it was the thermal fuse, would it be heating at all?

Any help would be greatly appreciated!!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
添加一条评论

1个答案

已选择的解决方案

Cause 1

Thermal Fuse

The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check the dryer venting when replacing a blown thermal fuse.

Cause 2

Gas Valve Solenoid

Gas dryers have two or more gas valve solenoid coils. The gas valve solenoids open the gas valve ports to allow gas to flow into the burner assembly. If a gas valve solenoid fails, the dryer won’t heat. To determine if one or more of the gas valve solenoids has failed, check the igniter. If the igniter glows and goes out but does not ignite the gas, the gas valve solenoid is defective. If one or more of the gas valve coils are defective, I recommend that you replace them as a set.

这个答案有帮助吗?

得分 2

8条评论:

So if it were the thermal fuse, would the dryer get hot at all? I checked the air flow and it is getting good air flow out the back of the dryer and also to the outside when I hook the hose back up.

The igniter does light the gas and for the first few minutes, the dryer starts getting hot but then cools off.

Thank you for your help!

完成的

when it shuts off, use a multimeter to test the fuse.

完成的

It never shuts off, it just stops getting hot. I'll check it anyway though to be sure.

完成的

How do you check solonoids

完成的

@pat112 read Cause #2

完成的

显示更多的3条评论

添加一条评论

添加你的答案

Barb Howe 将永远感激不已
浏览统计数据:

过去 24 小时: 7

过去 7 天: 28

过去 30 天: 103

总计 17,224