声誉积分: 177
4
2
It was not reseting (error 4005), I replaced the battery and did reset without screen, and it worked. But when I plugged the screen back in, I got this strange issue. Note that the phone never hit the ground, it's in perfect conditions. I've tried to disconnect and reconnect all the cables, but nothing changes. Any clues ?
声誉积分: 177
4
2
Update ! I already had the cables properly connected. I just asked for help in a local store, they told me that should just be static electricity (?) stored in the screen. In 1 week it seems to have discharged itself, and now the screen I working perfectly. Hope this helps !
这个答案有帮助吗？
声誉积分: 159.7千
11
191
368
Either the screen is not plugged in properly or the screen is damaged.
Unplug the battery and plug it back in and see if that helps.
这个答案有帮助吗？
It's kinda strange here. This does not resolve the problem, but when I only connect the screen cable (so 1 connected and 3 disconnected), the screen shows the same, but with more pronounced lines. And now that's what happens when I plug it all back in : https://imgur.com/a/NAfmS
the cable is not seated properly, try cleaning out the connection on the board and ensure the connector from the screen is flat (not bowed) before installing
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 152
