跳转到主内容

修复你的物品

维修的权力

商店

Released in Japan on December 12, 2004, in North America on March 24, 2005, and in Europe on 1 September, 2005.

84 个问题 查看全部

Charging port connector broken

I have a psp 1000 firstly i removed the fuse which was responsible for charging, and it worked, but now the cknnector on the motherboard which cknnects the charging soket is broken. Waht shall i do, replace that connector or create an alternativ way of charge with that soket, or to buy an external battery cherger?

P. S.

The mini USB port is damaged, removed and can not be replaced, so mini USB mod is not an option.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个回答

已选择的解决方案

Hi!

I had the same problem as you on my PSP 3000. What I came up with was easy, I completely removed the broken socket from the motherboard (until the solder pads it was stuck to were accessible). The I cut the matching connector from the ends of the plug component. Then I soldered it directly to the motherboard.

I hope I won't ever have to change the plug itself, cause that would mean replacing the board as well at this point.

I'm not sure what other options you explored, but this one won't cost you anything and it's not that difficult to do.

这个答案有帮助吗?

得分 3

评论:

Yeah, this could be an option, I was thinking about soldering there a microUSB or mini USB port, but that could lead to creating additional holes in the housing. But, i tried to connect the charger to PSP several days ago, and it somehow is charging again.

完成的

添加一条评论

添加你的答案

Eugen-Andrew Coliban 将永远感激不已
浏览统计数据:

过去的24小时: 2

过去的7天: 4

过去的30天: 31

总计 1,567