声誉积分: 1
1
My original 360 will turn on, but after about three to five minutes, it will completely seize up, and there is an aweful buzzing noise coming from my speakers. The screen also becomes distorted with lines running through it. If Anyone can help I would be appreciative, thank you.
声誉积分: 1千
6
9
声誉积分: 330
6
1
2
That fix is not permanent. In fact, not even a reball with leaded solder is permanent, albeit it's the longest-lasting solution.
This method is basically just forcing the motherboard to warp so that the broken solder joints under the GPU touch.
A reflow of the GPU is a way better fix. Most people charge $35-40 for this on craigslist. Make sure they use a real reflow station with a real preheater and not a heatgun with electric griddle.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 3,938
