修复你的物品 社区 商店

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2687 个问题 查看全部

更多选项

Device won't power on after screen replacement

Hi! I'm relatively new to smartphone repair, but been in IT for years. I've run into an odd issue with a screen replacement on an iPhone 6s.

With the original screen connected, (with no home button) the device powers on and responds to the vibration rocker switch.

I turn the device off, swap in an identical replacement screen from ifixit, (albeit white instead of black, also with no home button) and the device REFUSES to turn on.

Done this about 10 times with the same results, so I'm fairly certain I'm not shorting the phone out with the replacement screen. What could possibly be wrong?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

did you try the old screen after the replacement, if so does the vibration work again

这个答案有帮助吗？

是 否
得分 1

1条评论:

Yep, the device *only* powers on and vibrates when I have the original LCD cable connected. I suspect it may be a damaged connector.

由完成的

添加一条评论

更多选项

You may have gotten a bad screen .

Is there 1 connection or two

这个答案有帮助吗？

是 否
得分 0

3条评论:

There are 3 total connections, I ordered the full assembly. But the phone refuses to power on with anything other than the original screen display cable. I suspect the connector on the logic board may be damaged...

由完成的

Try plugging in just the lcd and touch connector (leave the small one to the right off) and see if it comes on. Sometimes the front camera flex can be faulty causing this issue.

由完成的

Unfortunately I tried every possible arrangement of connections. The only way I ever get the phone to power on is when the original (broken) display connector is attached. With or without the other 2 connectors. If the original display connector isn't attached, it doesn't power on...

由完成的

添加一条评论

添加你的答案

Bay 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 51