声誉积分: 1
1
i dropped the ipod on its corner the screen is shattered, i want to replace it but i noticed the metal case at the back of the ipod is slightly indented, will i have to replace both or can i just get away with replaceing the screen???
声誉积分: 685.3千
3.4千
1.1千
2.6千
I use several metal burnishing tools for working on cases. You can move metal with light pressure and rubbing back and forth from the back side. Here's the concept: http://en.wikipedia.org/wiki/Burnishing_...)
I use smooth bright metal bars of different diameters and a dental tool with just a round metal ball on the end. It helps if you have some junk drawers with old metal parts.
Go here and down to burnishers: http://www.ifixit.com/Answers/Edit/43924
这个答案有帮助吗？
+ The burnishing is great to make decent repairs and to fit the pieces the way they should, but if one has never done it, I don't think the back of the Touch would be a good place to practice :-) I'd get a new back and save the old one to practice than buy a touch of ebay to be fixed and so on...:-)
Turkey is right. This procedure needs to be practiced. Put a tin on a tin can with both ends cut off and see if you can work it out.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 805
