声誉积分: 23
1
iBook G3 800Mhz 640ram
Using the instructions on website and the suggested 120gb WD hard drive from ifixit, I can not get the hard drive to be shown on the install OSX 10.3 software. The old hard drive works fine just a little small to really do anything with. This is my first apple computer. Is there some sort of bios setting or setup for an apple to recognize a new hard drive?
声誉积分: 685.3千
3.4千
1.1千
2.6千
It needs to be formatted before you can install a system. Start up from your system installation disk. Hold down "C" key. Go to the second screen pull down menu to Utilities -> Disk Utility and select the drive on the left and format it OSX Extended, give it one or more partition. Now you can install a system.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 1,541
2条评论
Thanks Mayer,
Your the best.
由 nwasness 完成的
Glad to be of service. Thanks for a well stated question.
由 mayer 完成的