跳转到主内容

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 个问题 查看全部

Ipad mini charges only when turned off.

Ipad Mini. Unit has NO damage to the charge port. Using original Apple cable & charging block. While unit is booting up, charging meter goes from 1.23 A to 0 in a few seconds. While unit is turned off, meter reads 1.23 A solid till fully charged. Unit operates normally when charged.

Is this a possible battery issue?

Is this a possible charge port issue?

Is this a possible power management chip issue?

Thank you for any info

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

None of my iPhones seem to be charging when using a nongenuine charging cable. When the device is dead (0%) it starts charging normally, however, when the battery level reaches around 10% the device turns on and current drops to 0A (won’t charger for nothing). My power brick is 100% genuine but the cable is aftermarket one. Switching to a genuine cable fixes this issue for me. As long as the cable is genuine it works. I tried genuine cable with Samsung power brick and it still works. Not sure if this will help as you said you’re using a genuine charger/cable.

这个答案有帮助吗?

得分 0
添加一条评论

Tony “Using original Apple cable & charging block “ since you are already using original cables and charger I would start by replacing the battery. That will provide you with a known well starting point for further troubleshooting. Anything after that will require you to do some board level repairs. Remember that the Lightning port is soldered on to the logic board and the two must be replaced as a unit, if you need to replace it.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Tony 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 228