修复你的物品 社区 商店

iPhone 6s Plus 发布于2015年9月25日,有两个型号A1687、A1634，网络制式有GSM、WCDMA，存储容量有16GB、64GB、128GB可选，机身颜色有银色、金色、深空灰、玫瑰金。维修iPhone 6s Plus和前代产品相似，需要螺丝刀和撬棒等。

1041 个问题 查看全部

更多选项

Taptic engine not working - how to test outside of phone.

I got a client's phone today that is not vibrating. It was previously jailbroken, and had the issue a few months after that. Now after damage, no signs of drops, I'm the "first one" in it. (found some finger prints in the speaker)

I'm not sure if it has a bad lightning assembly, taptic engine or something else. I don't have spare parts to test at the moment. Any idea how to test it outside of circuit? Or any pin outs for it? Ideally I'll have another iPhone 6sp come in to try this one in that phone, but I'm not holding my breath.

Thanks

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
2条评论

could you not add voltage to it guessing about 3v

由完成的

I could, but with what current and to what pins? It has a flex cable going to the lightning dock with about 10 pins I think? I don't have it in front of me.

由完成的

添加一条评论

3个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Try to get a dc power supply and take out the Taptic Engine then slowly increase the voltage to it to see if it moves. Or get a multimeter and measure the voltage across the pins on the lightning connector and make it vibrate and see if any voltage comes up.

这个答案有帮助吗？

是 否
得分 2
添加一条评论

更多选项

ideally you should get some test parts as trying to test it could be the hard part and still not lead anywhere

这个答案有帮助吗？

是 否
得分 1

2条评论:

Yep, ideally I would. But I am looking for another solution that's why I posted here and why I said I don't have any test parts. Unfortunately I don't see any output on ZXW for its plug as it is on the lightning assembly.

Do you have a working one? An oscilloscope you could test the output frequency and voltage with? That would be super helpful.

由完成的

i dont only iphone 6 and i dont use an oscilloscope, can you not change vibration settings in sound to see if it works

由完成的

添加一条评论

更多选项

I have this problem with my 5S, he must of installed some Taptic tweak. If you press the bower button and volume up and down buttons at the same time you should feel a vibrate. Sadly updating the phone doesn’t fix it, and neither is restoring the phone from a back up.

The Fix. You will have to reset the entire phone and not restore it from a back up.

(Back up info just in case)

这个答案有帮助吗？

是 否
得分 0

1条评论:

I did a DFU restore from a new firmware I downloaded from Apple. 11.0.3. Phone is like new now, but still no luck on the Taptic problem... I think tomorrow I will recieve the parts, but the person needed their phone back - Maybe I will get my hands on it again in the future.

由完成的

添加一条评论

添加你的答案

Joseph Hughes 将永远感激不已
浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 17

总计 4,660