跳转到主内容

型号 A1213或A1218,闪存容量:8、16及32GB

216 个问题 查看全部

No volume control- headphones or dock

I can't control the volume output of my 1st gen Touch on firmware 3.3.1.

When I plug headphones in the volume slider doesn't appear, reading around I see this was a pretty common issue when people updated to 3.x so I ran a jailbreak and installed SBSettings and the volume slider widget - it doesn't control the volume, still stays at a constant level.

I plugged into the dock and have the same issue - no control over volume from the iPod.

So although I was initially thinking a headphone jack might need replaced I'm not so sure now that when docked it still has the same issue!

Any ideas?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
1条评论

Just realised you can't control the volume in a dock with the volume slider on any iPod - maybe it is tahat jack needing replaced!

完成的

添加一条评论

1个答案

已选择的解决方案

I would definitely start with the headphone jack. It is solder on the logic board and is available here http://www.parts4ipods.com/epages/es1157... and here http://www.ipadpartsshop.com/product_inf... and the instructions for the logic board are here iPod Touch 1st Generation Logic Board Replacement Good Luck to you and let us know what worked. :-)

这个答案有帮助吗?

得分 1

2条评论:

Replacing the jack indeed did work - I just removed the ribbon and soldered small jumper cables.

完成的

Congratulations, good job and inventive :-) Thanks for accepting my answer.

完成的

添加一条评论

添加你的答案

Neil 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 3,764