跳转到主内容

Repair guides and support for Panasonic's Viera line of televisions.

383 个问题 查看全部

Tv won't turn on

Viera model TH42PZ77U blinks 8 times. What part do I need and where can I get it?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
添加一条评论

3个答案

已选择的解决方案

@henny17 this from Panasonic regarding the 8 blink code

Symptom: Unit is dead with 8 blinks power LED.

Cause: Defective SS board, part number TXNSS1SDUU.

Remedy:

1. Identify three components on the board: Q16051, D16041 and R16051. Refer to Fig.1

2. Remove above parts from the board. Clean the heat sink and apply fresh compound.

3. Replace with new parts as follows:

• Q16051: DG3D3020CVLW

• D16041: B0FBCN000005

• R16051: D0GF5R6JA047

Inspect all grounding paths around mounting holes on the board and on the PDP panel area and carefully clean noticed arcing marks (Fig.2 and Fig.3) using sand paper with 400~1000 grit.

Block Image

Block Image

Block Image

Double check your board to see if it shows the same components on the SS board. If so you could probably repair it the same way. If not, replacing the SS board should work. Of course, if you are not up to soldering those pieces, you can always replace the board.

这个答案有帮助吗?

得分 2
添加一条评论

Hi @henny17 based on the search, I believe it is due to defective SS-BOARD

Open up and check also, and follow the below link for more information

Light blinks 8 times no picture or sound

这个答案有帮助吗?

得分 1

评论:

@salmonjapan thanks for mentioning my answer in your link :-)

完成的

@oldturkey03 , up your solution :)

完成的

添加一条评论

Thanks for this..advise

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Joe Henny 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,794