修复你的物品 社区 商店

发布于2015年3月，并在2015年4月10日上市。盖乐世S6是盖乐世家族又一部旗舰机型。其曲面屏版本被称为盖乐世S6 Edge。

487 个问题 查看全部

更多选项

Am I using too much heat while changing just the glass on S6 repair?

I have tried on two displays to separate the LCD and front screen. The closest I got at being successful, I had used my hot plate set at 125 C. When I finally got them apart the long sides of the screen had curled up. Now, I understand that these have a "polarizer", is that what seems smokey? That is what curled up on me. These are not cheap to buy everyday to practice on. If anybody could help me out here it would be greatly appreciated.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

I think I found someone who answered the question about heat best.

Screen heating temperature measurements Gave a similar opinion about heat.

125 C /257 F is really high. Most of the time you start off in low heat and gradually apply or slowly increase to about 80 C/ 176 F.

Rule of thumb when I do screens or phones that have glass is if it's too hot to hold then it needs to be cool off.

That's why I prefer a heat gun / hair dryer. Slow and easy does it.

Hope this helps

这个答案有帮助吗？

是 否
得分 2
添加一条评论

更多选项

I normally used hot air gun not the soldering one but the heavy duty plumber or car dent fixer use. And deprecate with visiting card. It's easy when you know the heat and gentleness

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Rick 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 241