跳转到主内容

发布于 2012 年 6 月, 型号 A1278. Intel 处理器,支持 Turbo Boost, 最多 512 MB DDR5 显存

1622 个问题 查看全部

Where is the infrared receiver?

So my MacBook Pro(13-inch Mid-2012 Unibody) can receive infrared signals, but it is unreliable(often does not like to work). What I am trying to figure out is where the infrared receiver is, so I can make sure it is not covered and make sure it is clean. I have found some information indicating that it was on a bracket along with the sleep ID light, and/or holding the hard drive, but on earlier models. I have not been able to find anything conclusive saying that it is in the same place on my model.

Also, I'm not sure exactly where on the outside case of the assembled product that would place the receiver. That, I believe I could find out myself by going through the teardown/repair guides/videos, but I'm not sure of it being on that part to begin with. I also think it would be easier if someone here knows or remembers off the top of their head where that bracket/light/receiver is. Any help here would be appreciated.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

2个答案

已选择的解决方案

That hard drive I/R cable is well know on this particular model. Apple was even replacing it for free (they may possibly still be doing this). It fails in two places. One from contact with the rough bottom surface where the hard drive sits on the cable and vibrated it against the bottom of the case. In this case you cover the bottom with wide electrical tape along the path of the cable. The other failure point is on the top step of the wall climb as it comes over the top. The bottom of the case comes in contact with the cable and damages it. When replacing the cable I put pads on either side of the cable to prevent the bottom cover from coming in contact with the cable.

UPDATE 1/2/20

Block Image

I use 3M extreme mounting tape. (the red tape) due to its thickness.

这个答案有帮助吗?

得分 5

7条评论:

This îs something I didn't know . I've always wondered why they fail.

完成的

@soros that's what associating with other professionals on this site is great for. You don't have to learn everything on your own. I replace about three of these cables a week and had to develop my own fix for the problem. Just fixing a bad part doesn't cut it unless you can do something to prevent it from happening again ;-)

完成的

@mayer you are right, I don't have yet your experience in the field and trying to learn every day. I ask myself each time: from where this problem could have come.

In the case of this model I was thinking is a flaw in the circuit design not at all a wear and tear problem.

完成的

>The bottom of the case comes in contact with the cable and damages it. When replacing the cable I put pads on either side of the cable to prevent the bottom cover from coming in contact with the cable.

What "pads" do you use?

Would red electric tape work (with max temp 105 C)? The bottom cover gets warm during use but I don't know if it the cover temp or the ambient temp would exceed temp limit of the electric tape.

完成的

@efranz see update to post

完成的

显示更多的2条评论

添加一条评论
最有帮助的答案

The infrared receiver is on the right side of the Macbook and inside the machine this sensor is on the hdd cable

Outside

Block Image

Inside

Block Image

这个答案有帮助吗?

得分 8
添加一条评论

添加你的答案

wontyaholla 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 28

总计 9,231