修复你的物品 社区 商店

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2688 个问题 查看全部

更多选项

iPhone stuck in Boot Loop only when plugged in to power outlet.

Hello everyone,

My iPhone 6s fell this past weekend and since then has been stuck in a boot loop (apple logo appears and disappears) whenever it is plugged in to an outlet.

Ultimately I'd like to pull the data out of my phone via iTunes backup, but the problem I'm facing is that my iPhone does not seem to boot up when plugged in to my PC's usb port.

Anyone have an idea how I can enact atleast a bootloop on a PC or get my turned off iPhone recognized in iTunes?

I tried finding answers via search, but nothing seems to touch on the issue of my iPhone not booting when plugged in to a usb port on the PC.

Thank you.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 5
1条评论

I had the same problem. It may be a software issue but most likely the battery connecter is loose. I went to a nearby phone service shop and he opened it up right in front of me, and the battery connecter had gone loose, just like a little lego.

由完成的

添加一条评论

7个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Here are some things to try when you are faced with a boot-looping phone.

  • Try a hard reset (Home & Power button for 10 secs)
  • Use a genuine Apple Lightning connector
  • Use a genuine Apple charging brick and let it charge overnight
  • Try to connect it to different computers (mac/pc if possible) with an updated iTunes
  • Put the phone in recovery mode (search DFU Mode). Careful, this can reset your data
  • Use 3uTools for putting it in and out of Recovery Mode
  • Use 3uTools to flash the firmware (you can't downgrade)
  • Check the condition of all the flexes (with magnification)
  • Disconnect the Front Camera Ribbon from the logic board and reboot your phone
  • Disconnect the screen assembly completely and see if iTunes will recognize the phone.

Otherwise, you may have a logic board issue. If you are uncomfortable doing these steps, consider finding a repair shop to do the troubleshooting. A shop that also does micro-soldering can go deeper if the problem is not modular in nature.

这个答案有帮助吗？

是 否
得分 3
添加一条评论

更多选项


@jasrotia_1 did you ever find the solution, I have the same problem.

这个答案有帮助吗？

是 否
得分 1

1条评论:

It some hardware issue. I gave to technician (not Apple Auth)

He replaced a chip . It was all fine thereafter

But exactly what chip he replaced I am not aware

由完成的

添加一条评论

更多选项

Hi everyone and thank you for the responses.

It turned out my phone had simply died and I ended up having to go with the hard reset in order for my phone to work again.

这个答案有帮助吗？

是 否
得分 0

2条评论:

Can you explain how did the hard reset work for you? ive been stuck on this one

由完成的

hello, how did you solve the problem?

由完成的

添加一条评论

更多选项

Try force restart, press and hold power button and Home button at the same time about 10s until you see an Apple Logo then release it.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

I tried using 3U tool to restore my 6s from Recovery Mode. Screen with apple Logo Started flashing (@ 2-3sec per flash). On & OFF .. it is just going on. Nothing is working.

Status is also started showing “Not Connected”

When i remove the Lightening Cable from the phone, it just shuts Off Instantly.

Any Advice / suggestions ..

Regards

这个答案有帮助吗？

是 否
得分 0

4条评论:

DFU recovery!!! search up videos on youtube

由完成的

you may have to attempt it a few times. Ive seen reviews of people needing it upwards up 3 times before it works. It will erase ALL data, just make sure its backed up

由完成的

@jasrotia_1 did you ever find the solution, I have the same problem.

由完成的

exact same problem, has anyone found the fix?

由完成的

添加一条评论

更多选项

I litteraly have this same problem and its so stressful, my computer wont charge it at all & only turns on and goes into boot loop with wall charger

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

sometimes this logo loop issue in iphone is due to harware problems.. for example now i have a phone that has the same problem and I tried to charge or update it using itunes but it gives error(9)… I heard from my friend that he had the same issue and told me it may be from a crash in charging module located inside the phone responsible to control lightening electrical parameters. I guess the previous owner of my phone has used non-standard chargers

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

CGSK 将永远感激不已
浏览统计数据:

过去 24 小时： 20

过去 7 天： 146

过去 30 天： 584

总计 30,800