My New 3DS XL turn on, but after a few seconds it turns off

Question

Nintendo 3DS XL 2015

任天堂3DS XL 2015在市场上被称为新任天堂3DS XL，于2014年10月11日在日本发布，2015年2月13日在北美发布。

369 个问题查看全部

Matias Mansilla @mati36

声誉积分: 1

1

发帖于: 2017年8月7日

更多选项

My New 3DS XL turn on, but after a few seconds it turns off

Hi! sorry if my english isn't very good, i need your help

I had this problem with my New 3DS XL: i had a problem with the motherboard, so i bought another for replacement. I follow the Ifixit guide to change it, and all went good, but when i turned it on, it starts the menu screen, shows up some icons, let me move a bit, and before i can do anything, it appears "An error has ocurred", and it says that i should try power it off. I tried many times and nothing, it's always the same.

Besides that, my top screen shows some moving "artifacts" in that process, but i'm not sure if it's the screen or the same problem that causes the error.

I hope you could help, i'm really desperate with this, it's been months that i've been trying this 3ds to work so i can play something

Thanks!

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

已选择的解决方案

Alex Niculescu @alexniculescu

声誉积分: 17.9千

27

26

33

发帖于: 2017年8月8日

更多选项

Hi!

Have you tried taking it apart again an checking all ribbon cables for damage and their connections to the board? They are very sensitive. A grain of dust inside the connector or an imperfect connection can prevent your console from working properly.

这个答案有帮助吗？

是否

得分 2

5条评论:

I'll try desconnecting all the motherboard, and then connecting again, it's my only hope. I fear also that a ribbon cable could have been damaged during assembly. Are they that fragile?

由 Matias Mansilla 完成的 2017年8月8日

Yes, they are... I managed to break 2 of them when putting a DS Lite back together... Have fun taking it apart, maybe report back after you're done.

由 Alex Niculescu 完成的 2017年8月8日

I seem to have found the problem. One of the screen LCD connectors, seems to miss a couple of pins, in the motherboard i bought. I compared to the original motherboard i had and confirmed that it has a couple of pins less. I think that is what causes the problem. Can this cause that "An error has ocurred" screen? Or if it's the screen connector, it should turn on with no problems, but display the image wrong?

由 Matias Mansilla 完成的 2017年8月9日

A bad screen-board connection can cause that sort of error. The board can't access all of the screen's features and returns an error, then turns off.

由 Alex Niculescu 完成的 2017年8月11日

Oh, i thought so. Thanks for all the help!

由 Matias Mansilla 完成的 2017年8月11日

添加一条评论

I'll try desconnecting all the motherboard, and then connecting again, it's my only hope. I fear also that a ribbon cable could have been damaged during assembly. Are they that fragile? — Matias Mansilla
Yes, they are... I managed to break 2 of them when putting a DS Lite back together... Have fun taking it apart, maybe report back after you're done. — Alex Niculescu
I seem to have found the problem. One of the screen LCD connectors, seems to miss a couple of pins, in the motherboard i bought. I compared to the original motherboard i had and confirmed that it has a couple of pins less. I think that is what causes the problem. Can this cause that "An error has ocurred" screen? Or if it's the screen connector, it should turn on with no problems, but display the image wrong? — Matias Mansilla
A bad screen-board connection can cause that sort of error. The board can't access all of the screen's features and returns an error, then turns off. — Alex Niculescu

Alex M @alexm10790 声誉积分: 1 · Answer 1 · 2023-03-29T16:31:49-07:00

Alex M @alexm10790

声誉积分: 1

发帖于: 2023年3月29日

更多选项

I also had this problem so just in case this saves someone the effort of unscrewing and refitting all the ribbon cables, this can also be caused by the wifi card not being pugged in right (the red wire)

这个答案有帮助吗？

是否

得分 0

添加一条评论

Nintendo 3DS XL 2015

My New 3DS XL turn on, but after a few seconds it turns off

2个答案

添加你的答案