跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2682 个问题 查看全部

Backlight broken after screen replacement. Soldered filter no fix.

Backlight doens't worker after change of screen

Tried changing cracked screen on my own. Did not turn turn off battery before starting.

Changed the screen. No picture. Used a flashlight and saw that the screen and phone was working, but with no backlight.

I sent the phone to a repair store in Norway. The guy said to me that I broke the backlight filter. He soldered a new one. Backlight still doesn't work. He says that he didn't find any other errors than the short-circuiting of the backlight filter. He has confirmed that it gets the voltage it should get.

He also said that the the backlight went on a couple of times when he tried booting the phone a second or two before turning off.

Do you know what the problem could be?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

From the sounds of it he didnt know too much of what he was doing or how to do it!

You can buy a backlight board from any good parts supplier. I personally wouldnt have soldered it as its close to the LCD and you dont want to damage that too.

What you need to do is disconnect the battery BEFORE anything else that you do.

I'd put a new screen on where the backlight is already fitted.

or

take it to somewhere else that has experience in changing screens.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Jan Hansen 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 332